Penerbit: Department of Physics, Faculty of Mathematics and Natural Science, University of Lampung
P-ISSN: 2747-2043
E-ISSN: 2747-299X
DOI: 10.23960/jemit
Fakultas Matematika dan Ilmu Pengetahuan Alam Fisika dan Astronomi Arsitektur
Artikel (130)
Production of an Orbital Shaker Device with Time and Rotational Speed Control Using Potentiometer Based on Arduino Uno
Vicias, Icha Arum , Pauzi, Gurum Ahmad , Ayu, Humairoh Ratu
Mixing solutions is an everyday activity performed in laboratory spaces. Mixing solutions manually by shaking is less effective, as it takes a long time and requires much effort. Therefore, an orbital shaker has been created to mix solutions with a digital unidirectional movement. This device is des...
Journal of Energy, Material, and Instrumentation Technology; Vol. 5 No. 1 (2024): Journal of Energy, Material, and Instrumentation Technology; 17-27 | 2024
Design and Electrical Characterization of Plant Microbial Fuel Cell (PMFC) Using Eichhornia crassipes by Varying the Electrode Distance and Effect Light of the Sun
Suryani, Mei , Pauzi, Gurum Ahmad, Junaidi, Junaidi
The Plant Microbial Fuel Cell (PMFC) design using water hyacinth has been successfully created. The PMFC was then treated by varying the distance of the electrode and giving the effect of sunlight. The electrodes used are Cu-Zn pairs where the electrode distance varies, with values of 3, 6, 9, and 1...
Journal of Energy, Material, and Instrumentation Technology; Vol. 5 No. 1 (2024): Journal of Energy, Material, and Instrumentation Technology; 10-16 | 2024
Analysis of the Effect of Variations of Silica Concentration on Synthesis γ-Al2O3
Fuadiyah, Nadhifatul, Marjunus, Roniyus, Rustyawan, Wawan
Research has been carried out to analyze the effect of variations in silica concentration on the synthesis of γ-Al2O3. This research was conducted to determine the variation of Silica against the support γ-Al2O3which is the best as a hydrotreating catalyst in the green fuel indus...
Journal of Energy, Material, and Instrumentation Technology; Vol. 5 No. 1 (2024): Journal of Energy, Material, and Instrumentation Technology; 1-9 | 2024
Influence Variation Concentration Zn(NO3)2·6H2O Against Group Function, Size Particles, and Morphology Particle Nanoparticles ZnO with Method Green Synthesis Using Extract Leaf Moringa
Benyamin, Chairunissa A, Manurung, Posman, Suprihatin, Suprihatin
This research was conducted to determine the effect of varying concentrations of Zn(NO3)2·6H2O (zinc nitrate hexahydrate) on functional groups, particle size, and particle morphology of ZnO nanoparticles using the green synthesis method using Moringa leaves. The materials was used in this study wer...
Journal of Energy, Material, and Instrumentation Technology; Vol. 4 No. 3 (2023): Journal of Energy, Material, and Instrumentation Technology; 117-124 | 2024
Production of Nanocellulose from Kepok Banana Peel Waste Using Acid Hydrolysis Method
Putri, Faradilla Nabila, Manurung, Posman, Suciyati, Sri Wahyu
Research on the production of nanocellulose from kepok banana peel waste has been carried out using the Acid Hydrolysis method with H2SO4 Sulfuric Acid. This study aims to determine the effect of giving H2SO4 on kepok banana peels and the crystal structure and surface morphology of nanocellulose on ...
Journal of Energy, Material, and Instrumentation Technology; Vol. 4 No. 3 (2023): Journal of Energy, Material, and Instrumentation Technology; 110-116 | 2024
Effect of Variation of Concentration of Ketapang (Terminalia Catappa) Fruit Extract on The Corrosion Rate of ASTM A36 Iron
Prabowo, Ocean, Syafriadi, Syafriadi, Suka, Ediman Ginting
The aim of this study was to investigate the influence of varying concentrations of Terminalia catappa fruit peel extract on the corrosion rate during immersion periods of 2 days, 4 days, and 6 days for ASTM A36 steel. The ASTM A36 steel specimens were immersed in a corrosive medium containing 2% Na...
Journal of Energy, Material, and Instrumentation Technology; Vol. 4 No. 3 (2023): Journal of Energy, Material, and Instrumentation Technology; 106 - 109 | 2024
The Effect of Immersion Time on Corrosion Rate on St37 Carbon Steel in 3% NaCl Corrosive Medium Using Waru Leaves Extract Inhibitor
Sinaga, Fredison Dian , Suka, Ediman Ginting, Karo, Pulung Karo
The research of effect of immersion time on the corrosion rate of St37 carbon steel has been conducted in a 3% NaCl corrosive medium using a hibiscus leaves extract inhibitor. The samples of carbon steel St37 were immersed in a corrosive medium of NaCl 3% without being given and given the inhibitor ...
Journal of Energy, Material, and Instrumentation Technology; Vol. 4 No. 3 (2023): Journal of Energy, Material, and Instrumentation Technology; 99 - 105 | 2024
Smart Green Box Trash Design Based on HC-SR04 Sensor Arduino Uno Integrated
Dika, Mahardika Setiawan, Suciyati, Sri Wahyu, Supriyanto, Amir
This research has realized the design of a smart green trash box based on the HC-SR04 sensor, which is integrated with Arduino Uno. This research aims to design and build a digital instrumentation system based on Arduino Uno, applying Ultrasonic Sensors to the Green Box Trash System. In addition, th...
Journal of Energy, Material, and Instrumentation Technology; Vol. 4 No. 3 (2023): Journal of Energy, Material, and Instrumentation Technology; 89-98 | 2024
Analysis of the Effects of CO2, H2S Composition, and Temperature on Steam Towards Corrosion Rate in Geothermal Power Plants
Firdaus, muhammad Rafsya , Hidayati, Noor, Ekayuliana, Arifia
The corrosion in the steam line pipes at the Geothermal Power Plant is caused by acidic substances present in the steam, especially H2S and CO2, originating from the geothermal reservoir. During operation, this leads to thinning of the pipe walls, affecting the pipe's thickness. The purpose of this ...
Journal of Energy, Material, and Instrumentation Technology; Vol. 4 No. 4 (2023): Journal of Energy, Material, and Instrumentation Technology; 163 - 168 | 2023
The Influence of Heatmap Correlation-based Feature Selection on Predictive Modeling of Low Alloy Steel Mechanical Properties Using Artificial Neural Network (ANN) Algorithm
Leni, Desmarita, Sumiati, Ruzita , Adriansyah
This study aims to evaluate the influence of heatmap correlation-based feature selection on predictive modeling of low alloy steel mechanical properties using an artificial neural network (ANN) algorithm. Heatmap correlation was used to determine the chemical elements most correlated to the low allo...
Journal of Energy, Material, and Instrumentation Technology; Vol. 4 No. 4 (2023): Journal of Energy, Material, and Instrumentation Technology; 152 - 162 | 2023