Penerbit: The University of Lampung
Menampilkan semua artikel dari penerbit ini.
Ditemukan 948 artikel.
Rainfall Thresholds Analysis for Early Warning of Landslides in The Bompon Watershed
Oleh: Ulul Albab, Milya Aflah, Nugroho, Bayu Dwi Apri
The transitional zone between the central and southern morphologies of Java is characterized by steep slopes and thick soil. On the other hand, high rainfall in the area poses a potential threat of landslide hazards. This research is conducted in the Bompon Watershed, located in the transitional zon...
Sumber: Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering); Vol. 13 No. 3 (2024): September 2024; 628-636
Environmentally Friendly Paving Block Based on Wood Waste: The Effect of Rubber Wood Waste Content on the Physical-Mechanical Properties of Paving Block
Oleh: Fauzi, Daffa Naufalian, Saputra, Bagus, Riniarti, Melya
The wood sawing industry generates significant waste, consisting of wood chips, wood scraps, and sawdust. This research aims to evaluate the effect of rubber wood sawdust addition on the moisture content, water absorption capacity, and compressive strength of paving blocks. The study was conducted i...
Sumber: Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering); Vol. 13 No. 4 (2024): December 2024; 997-1005
Water Productivity of Mustard Green (Brassica juncea L.) with Variation of Irrigation Systems
Oleh: Anika, Nova, Kusmali, Muh, Harmiansyah, Harmiansyah
Drip irrigation and self-watering are two examples of irrigation technology improvements that employ effective and efficient watering methods. Water productivity may be used as a benchmark to compare irrigation efficiency and agricultural productivity. The purpose of this study was to assess mustard...
Sumber: Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering); Vol. 13 No. 3 (2024): September 2024; 831-838
The Use of the Normalized Difference Red Edge (NDRE) Vegetation Index from Multispectral Cameras Mounted on Unmanned Aerial Vehicle to Estimate the Nutrient Content in Oil Palm Leaves
Oleh: Hariadi, Badi, Sastrohartono, Hermantoro, Krisdiarto, Andreas Wahyu
This study aimed to develop a prediction model for the nutrient content of N, P, K, Mg, and Ca in oil palm leaves using the Normalized Difference RedEdge (NDRE) vegetation index derived from multispectral camera data. Data acquisition was carried out by an unmanned aerial vehicle (UAV), which was co...
Sumber: Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering); Vol. 13 No. 4 (2024): December 2024; 1051-1063
Performance Evaluation of Farm Machinery Utilization Under Custom Hiring Services Managements
Oleh: Zulhanafiah, Zulhanafiah, Paman, Ujang
Farm machinery hire service is a custom hiring business model managed by farmers’ groups at the farm level. The model is developed to facilitate access to farm machinery by small farmers and derive income (profit) from hiring out machinery services. This research attempts to evaluate the performan...
Sumber: Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering); Vol. 13 No. 3 (2024): September 2024; 679-690
Geographic Information System Design for Irrigation System Performance Index Main Network
Oleh: Ernanda, Heru, Andriyani, Idah, Nadzirah, Rufiani
Irrigation plays an important factor in supporting agricultural land productivity to improve agricultural production. This is achieved by maintaining a sustainable irrigation system through an effective and efficient irrigation system. One method to asses is by using the Irrigation System Performanc...
Sumber: Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering); Vol. 13 No. 4 (2024): December 2024; 1308-1319
Application of Stereo Vision to Control the Movement of the Robot Arm Towards the Position of Red Chilies
Oleh: Subrata, I Dewa Made, Baiquni, Ahmad Dzaky
The trend of decreasing young workers in the agricultural sector needs to be anticipated by developing intelligent machines known as agricultural robots. This research aims to apply a stereo vision system to control the movement of the robot's grip towards the 3D position of the red chili fruit. The...
Sumber: Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering); Vol. 13 No. 3 (2024): September 2024; 615-627
Exploring the Impact of Temperature and Solvent Ratio on Phenol and Flavonoid Levels in Alpinia galangal L. Extract Using Evaporative Vacuum Cooling
Oleh: Indriani, Dina Wahyu, Anggraini, Firdha Dwi, Hendrawan, Yusuf
The objective of this research is to determine the impact of temperature gradients and solvent ratios in the evaporative vacuum cooling method on the yield of phenol and flavonoid content in galangal extract; ascertain the impact of these factors on the yield generated by galangal extract; and ascer...
Sumber: Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering); Vol. 13 No. 4 (2024): December 2024; 1064-1076
Non-destructive Evaluation of Oil Content and Carotene in Oil Palm Fresh Fruit Bunches Based on Optical Properties Using Partial Least Square (PLS)
Oleh: Rahmi, Suaidah, Cherie, Dinah, Ifmalinda, Ifmalinda
Crude palm oil (CPO) is a raw material for making cooking oil that comes from palm oil, which is greatly influenced by the quality of oil palm fresh fruit bunches (FFB). Oil and carotene content in the FFB influence the quality of palm oil. The oil content is usually determined using a chemical meth...
Sumber: Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering); Vol. 13 No. 3 (2024): September 2024; 720-729
Non-Destructive Evaluation of Oil and Free Fatty Acid Content of Oil Palm Fresh Fruit Bunch Based on Thermal Properties Using Partial Least Square (PLS)
Oleh: Guspa, Monica, Makky, Muhammad, Santosa, Santosa
Indonesia is the largest producer of palm oil in the world, contributing 59 % of global production in 2022. The palm oil industry is a pillar of the economy and a source of foreign exchange through agricultural exports. To increase productivity and global competitiveness, strategies are needed, incl...
Sumber: Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering); Vol. 13 No. 3 (2024): September 2024; 772-781